SIMPLITEX
SIMPLITEX

Textile printing, simplified.

SIMPLITEX textile printing machines

Textile printing, simplified.

AI-vision DTG printers, inks and spare parts, built for garment printers, embroidery shops and the teams that print their own merch.

4 print heads 3.5 pl droplet 600 mm print bed 103 pcs / hour

One partner, from machine to ink

Most print rooms are assembled from three or four suppliers who do not talk to each other. We ship the machine, the consumables, the spare parts and the training, and we answer for all four.

Equipment

Two DTG platforms, one for entry shops and one for volume. Both use the same ink family, so a second machine does not mean a second learning curve.

Consumables

Ink, pretreatment, post-treatment, cleaning solution and crosslinker, shipped with the machine and restocked on a schedule that suits your volume. See the range.

Support

Installation checklist, remote diagnostics, on-site training and a spare parts kit. One address for the machine and for the bottle that ran out.

Where the machines are built

Production and assembly sit with our manufacturing partner in Foshan, an hour from our office in Guangzhou. We specify the configuration, test the machine and ship it under the SIMPLITEX name.

Printer assembled and tested with its control computer

Assembly and test

Each machine is assembled, filled and run before it is packed. The print test covers all four heads, the white circuit and the camera alignment, and a sample from that run ships in the crate.

  • AssemblyFoshan, Guangdong
  • Testprint run before packing
  • BrandSIMPLITEX nameplate and manual
  • Shippingwooden crate, IPPC marked

The camera finds the artwork

The heads follow. A camera reads the embroidery, the patch, the seam, and places the print on what is already on the fabric, not on a guess.

Colour printed over embroidery, with the stitched edge still visible
4print heads, independently fired
3.5picolitre droplet, down to 900 × 1800 dpi
600mm print bed, square
103pieces an hour, dark fabric

Print on the relief, not just the fabric

Embroidery, patches and thick garments are not flat. Because the print follows the height of what is already there, a flat graphic gains depth: the stitched edge stays visible under the colour, and the surface reads as 2.5D rather than a decal.

The machines

Two platforms, one ink system. Open a machine to see the full specification, the materials it handles and the samples we print on it.

MFI-600 four-head printer

MFI-600

Four heads, 600 × 600 mm, 6 mm relief. 50 to 103 pieces an hour on garments, denim and embroidery.

See the full specification
DTG4050-Aio printer

DTG4050-Aio

Two heads, 400 × 500 mm, drying base in the station. 50 seconds per A4 for printing where the customer is.

See the full specification

Will it fit on the bed?

The bed is 600 × 600 mm. Load a patch or a logo, set the width, and see the real size before you send it to print.

Bed600 × 600 mm Fits per bed1 per bed StatusOne per bed

Drag the artwork to move it. The size is for placement only; the real sample is printed on your fabric.

Send it for a sample
Your artwork placed on the 600 mm print bed
600 mm × 600 mm

News and scenes

What comes off the machine, what changed this week, and what the numbers look like. Four feeds in one place.

Open the journal

Samples from the machines

For pet brands

A pet's name, a pet's face, a bandana and a matching tee. The camera finds the patch or the pocket, so the print lands where it belongs instead of where a template guessed.

  • Bandanas and collars, printed by name
  • Pet tees, hoodies and raincoats
  • Matching owner and pet sets
  • Shelter and rescue fundraising merch

One-offs are the normal order here: a single bandana with a name, printed while the customer waits.

Print a sample for a pet brand

What it costs to print your own

Change any field to match your shop. The figures below are yours, not ours.

Monthly saving against outsourcing
$0
Your cost per shirt
$0
Monthly printing cost
$0
Machine pays back in
n/a

Excludes rent, power and financing. Change the ink, labour or outsource figures to the prices you actually pay. The point is to see which number moves the payback.

Sell SIMPLITEX in your market

We are opening territories for dealers, print shops and consumables distributors. Demo support, training at the factory and a spare parts list with the first order.

Distributor programme

Tell us what you print. We will tell you which machine, and print a sample.