SIMPLITEX

DTG4050-Aio

Two heads, pretreatment on demand and a drying base in one station. The compact machine: 400 × 500 mm, A4 print in 50 seconds, small enough to put where the customers are.

DTG4050-Aio printer with its control panel

Who it is for

A first machine for a shop moving out of heat transfer, or a print point inside a retail space, a campus, a studio, an event. It prints a T-shirt front or back, then dries it, without a second station.

First direct printer

Tens a day, full colour, no minimum. The step up from transfer film that keeps the shop’s margin in the shop.

On-site retail

Small footprint, drying built in, 400 × 500 mm covers a T-shirt front or back. Print a shirt while the customer waits.

Studios and events

Photograph, generate a design, print it. The workstation is designed around that loop.

What it does

Pretreatment on demand

A dual print module lays pretreatment only where the print goes, then colour on top. No separate station, no overspray, and the liquid stays controlled.

Drying in the station

The drying base sits in the same footprint, running at 40 to 100 °C. A shirt goes in, comes out printed and dry enough to fold.

Compact footprint

1221 × 1000 × 1500 mm for the printer, 1300 × 760 × 1100 mm for the drying base. It fits a shop floor that a four-head line would not.

Small ink packs

500 ml bottles instead of litres. A first machine carries less working capital in ink, and the same colour profiles as the MFI-600.


At a glance

Four numbers that decide where the machine can go. The bed is drawn to scale, with an A4 sheet inside.

400 × 500
mm print area

50 s
per A4 print, light fabric

40–100
°C drying base

500 ml
ink bottles, CMYK plus PT

Specifications

ModelDTG4050-Aio
Print heads2 × industrial, intelligent dot size optimisation
Droplet size3.5 pl
Resolution900 × 1800 dpi
Print directionBi-directional and uni-directional
Print area400 × 500 mm standard platen, custom sizes supported
Media thicknessUp to 10 cm, adjustable height
SpeedA4 light fabric 50 s per piece; standard mode 88 s
PretreatmentOn demand, dual print module with liquid control
DryingDrying base, 40 to 100 °C, 1300 × 760 × 1100 mm
InkAio ink, CMYK plus pretreatment, 500 ml bottles, 1,500 ml capacity
InterfaceGigabit Ethernet
ComputerWindows 10 or above, 16 GB
Printer size1221 × 1000 × 1500 mm
Weight1200 kg
PowerAC 110–240 V, 50 or 60 Hz, 140 W operating, 100 W standby
LanguageChinese and English


What it prints

DTG4050-Aio or MFI-600

Same ink family, same RIP, different job. The Aio is the machine you put where the customer is; the MFI-600 is the machine you put where the work is.

Specification MFI-600 DTG4050-Aio
Print heads 4 × XC90 industrial 2 × industrial
Print area 600 × 600 mm 400 × 500 mm
Layers in one pass Pretreatment, white, colour and finish Pretreatment on demand, then colour
Throughput 50 to 103 pcs/hour 50 s per A4, light fabric
Drying Finish head in line Drying base, 40 to 100 °C
Relief under the heads Up to 6 mm Flat goods, T-shirt focus
Ink packs 1 L / 5 L 500 ml
Footprint 2050 × 1550 × 2000 mm 1221 × 1000 × 1500 mm plus drying base
Built for Production, embroidery, thick goods On-site retail, first machine

Open the MFI-600 page.

Send us the fabric. We print the sample.

Tell us the garment, the artwork and the volume. We print on your material and send photographs within two working days.

Request a printed sample